obstacle

Use of 1 extra site is on the market on ask for

下载.jpg

Acknowledge POLLING: When the internally-timed write cycle has started out and also the EEPROM inputs are disabled, admit polling may be initiated. This will involve sending a start ailment adopted through the gadget deal with word.

The read/write little bit is agent from the operation desired. Only if the internal write cycle has completed will the EEPROM respond that has a zero making it possible for the read or create sequence to continue.

Read through operations are initiated the exact same way as compose functions together with the exception that the read/write find little bit inside the machine handle term is about to at least one. You will find two read through functions: byte study and sequential browse.

BYTE Study: A byte go through is initiated using a commence condition followed by a 7-bit info term deal with plus a higher read little bit. The AT24C11 will reply with the admit and afterwards serially output eight details bits. The microcontroller won’t react which has a zero but does make a next quit issue.

SEQUENTIAL Study: Sequential reads are initiated precisely the same as being a byte examine. After the micro- controller gets an 8-bit details word, it responds having an acknowledge. Providing the EEPROM receives an acknowledge, it’s going to carry on to increment the data phrase address and serially clock out sequential data text.

When the memory address limit is reached, the information term handle will “roll over” along with the sequential read through will proceed. The sequential browse operation is terminated when the microcontroller isn’t going to answer having an enter zero but does make a adhering to cease situation .

Retain the memory webpage row placement precisely the same

images (42)

The AT24C01 is able of a 4-byte pagewrite.A page write is initiated similar to a byte generate but themicrocontroller isn’t going to send out a quit issue following the firstdata term is clocked in. As an alternative, right after the EEPROMacknowledges receipt with the first details word, the microcon-troller can transmit as many as 3 far more data words and phrases.

TheEEPROM will react which has a zero following each and every knowledge wordreceived. The microcontroller must terminate the pagewrite sequence by using a end condition (make reference to Determine 2).

The info phrase handle decrease two bits are internally incre-mented pursuing the receipt of each information word.

The higherfive data term tackle bits are usually not incremented, retainingthe memory web page row site. In the event the phrase tackle,internally generated, reaches the web site boundary, the fol-lowing byte is put at first on the exact same webpage.

Ifmore than 4 data terms are transmitted to your EEPROM,the info word tackle will “roll over”and preceding information willbe overwritten.Admit POLLING: After the internally-timed write cycle has commenced plus the EEPROM inputs are dis-abled, admit polling may be initiated.

16 wire plastic double row in – line packaging unless otherwise specified

images (31).jpg

Physical Dimensions inches (millimeters) unless otherwise noted16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300″ WidePackage Number N16E

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and

Fairchild reserves the right at any time without notice to change said circuitry and specifications.LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to theuser.

2. A critical component in any component of a life supportdevice or system whose failure to perform can be rea-sonably expected to cause the failure of the life supportdevice or system, or to affect its safety or effectiveness.

My First Blog Post

Be yourself; Everyone else is already taken.
— Oscar Wilde.

This is the first post on my new blog. I’m just getting this new blog going, so stay tuned for more. Subscribe below to get notified when I post new updates.

Introduce Yourself (Example Post)

This is an example post, originally published as part of Blogging University. Enroll in one of our ten programs, and start your blog right.

You’re going to publish a post today. Don’t worry about how your blog looks. Don’t worry if you haven’t given it a name yet, or you’re feeling overwhelmed. Just click the “New Post” button, and tell us why you’re here.

Why do this?

Because it gives new readers context. What are you about? Why should they read your blog?
Because it will help you focus you own ideas about your blog and what you’d like to do with it.

The post can be short or long, a personal intro to your life or a bloggy mission statement, a manifesto for the future or a simple outline of your the types of things you hope to publish.

To help you get started, here are a few questions:

Why are you blogging publicly, rather than keeping a personal journal?
What topics do you think you’ll write about?
Who would you love to connect with via your blog?
If you blog successfully throughout the next year, what would you hope to have accomplished?

You’re not locked into any of this; one of the wonderful things about blogs is how they constantly evolve as we learn, grow, and interact with one another — but it’s good to know where and why you started, and articulating your goals may just give you a few other post ideas.

Can’t think how to get started? Just write the first thing that pops into your head. Anne Lamott, author of a book on writing we love, says that you need to give yourself permission to write a “crappy first draft”. Anne makes a great point — just start writing, and worry about editing it later.

When you’re ready to publish, give your post three to five tags that describe your blog’s focus — writing, photography, fiction, parenting, food, cars, movies, sports, whatever. These tags will help others who care about your topics find you in the Reader. Make sure one of the tags is “zerotohero,” so other new bloggers can find you, too.